Biodiesel from Algae Oil
- 1 Introduction
- 2 The potential of algae oil as a fuel source
- 3 Economics of algae biodiesel production
- 4 Reasons why algae biomass cultivation has potential
- 5 Conclusion
- 6 References
By Allison Vela-Mendoza
Algae are eukaryotes and conduct photosynthesis within membrane-bound organelles called chloroplasts. Chloroplasts contain circular DNA that is similar in structure to cyanobacteria. Algae are prominent in bodies of water, common in terrestrial environments.
Algal organisms are photosynthetic macro-algae or microalgae growing in aquatic environments. Macro-algae or “seaweeds” are multicellular plants growing in salt or fresh water. They are classified into three broad groups based on their pigmentation: brown seaweed (Phaeophyceae), red seaweed (Rhodophyceae) and green seaweed (Chlorophyceae) (Demirbas & Demirbas, 2010).
Microalgae are unicellular photosynthetic microorganisms, living in saline or fresh water environments that convert sunlight, water and carbon dioxide to algal biomass. The three most important classes of microalgae in terms of abundance are the diatoms (Bacillariophyceae), the green algae (Chlorophyceae), and the golden algae (Chrysophyceae) (Demirbas & Demirbas, 2010).
Among the eukaryotic, green microalgae of the class Chlorophyceae, those most widely utilized belong to the genera Chlamydomonas, Chlorella, Haematococcus, and Dunaliella. As aquatic relatives of plants, microalgae flourish in aerated, liquid cultures where the cells have sufficient access to light, carbon dioxide, and other nutrients. Algae are primarily grown photoautotrophically; still, some species are able to survive heterotrophically by degrading organic substances like sugars. Unlike terrestrial plants, microalgae do not require fertile land or irrigation. Because algae consume carbon dioxide, large-scale cultivation can be used to remediate the combustion exhaust of power plants (Rosenberg et al., 2008).
Algae biomass can play an important role in solving the problem between the production of food and that of biofuels in the near future. Microalgae appear to be the only source of renewable biodiesel that is capable of meeting the global demand for transport fuels.
The potential of algae oil as a fuel source
Over 80% of the energy we use comes from three fossil fuels: petroleum, coal, and natural gas. About 98%of carbon emissions result from fossil fuel combustion. About 98% of carbon emissions result from fossil fuel combustion. Reducing the use of fossil fuels would significantly reduce the amount of carbon dioxide and other pollutants produced. This can be achieved by either using less energy altogether or by replacing fossil fuel by renewable fuels. Renewable energy is a promising alternative solution because it fixes CO2 in the atmosphere through photosynthesis. They also produce lower or negligible levels of greenhouse gases and other pollutants when compared with the fossil energy sources they replace.
Algae, like corn, soybeans, sugar cane, wood, and other plants, use photosynthesis to convert solar energy into chemical energy. They store this energy in the form of oils, carbohydrates, and proteins. The plant oil can be converted to biodiesel, which is why biodiesel is a form of solar energy. The more efficient a particular plant is at converting that solar energy into chemical energy, the better it is from a biodiesel perspective, and algae are among the most photosynthetically efficient plants on earth.
The annual productivity and oil content of algae is far greater than seed crops. Soybean can only produce about 450 l of oil per hectare. Canola can produce 1200 l per hectare, and palm can produce 6000 l. Algae, on the other hand, can yield 90,000 l per hectare (table 3) (Demirbas & Demirbas, 2010). Microalgae contain lipids and fatty acids as membrane components, storage products, metabolites and sources of energy. Algae contain anywhere between 2% and 40% of lipids/oils by weight (table 1). Algae can grow anywhere there is enough sunshine and some can grow in saline water. All algae contain proteins, carbohydrates, lipids and nucleic acids in varying proportions. Microalgae can complete an entire growth cycle every few days. Although the percentages may vary, there are types of algae that are comprised up to 40% of their overall fatty acids. The culture of algae can yield 30-50% oil (table 2). Oil supply is based on claims that 47,000-308,000 l/hectare/year of oil could be produced using algae.
The algae used in biodiesel production are usually aquatic unicellular green algae (Chlorophyceae). This type of algae is a photosynthetic eukaryote characterized by high growth rates and high population densities. Under good conditions, green algae can double its biomass in less than 24 hours. Green algae can also have high lipid contents, usually over 50%. This high yield is ideal for intensive agriculture and can be an excellent source for biodiesel production (Demirbas & Demirbas, 2010).
Chlorella is a single-celled green algae belonging to the class of Chlorophyceae. It is spherical in shape, about 2 to 10 μm in diameter, and does not have a flagella. Chlorella has green photosynthetic pigments, chlorophyll-a and chlorophyll-b, in its chloroplast. Using photosynthesis, it multiplies rapidly requiring only carbon dioxide, water, sunlight, and a small amount of minerals to reproduce. Chlorella is believed to be capable in serving as a potential food and energy source because of its photosynthetic efficiency to reach 8% comparable to other highly efficient crops such as sugar cane(Wikipedia-Chlorella).
Manipulation of metabolic pathways can redirect cellular function toward the synthesis of preferred products and even increase the processing capabilities of microalgae (figure 1). For heterotrophic microalgae, outside carbon sources offer a large amount chemical energy, which the cells often store as lipid droplets. Heterotrophically cultivated Chlorella protothecoides has been shown to accumulate as much as 55% of its dry weight as oil, compared to only 14% in cells grown photoautotrohpically (Rosenberg et al., 2008).
Dunaliella is a unicellular green algae also belonging to the class of Chlorophyceae. It is rod to oval shaped and about 9 to 11 μm in diameter. The organisms are simple to cultivate and do not clump or form chains.
The properties of various fatty esters determine the overall fuel properties of the biodiesel fuel. There is no one strain or species of algae that can be said to be the best in terms of oil yield for biodiesel. But, diatoms and green algae are the most promising. Scenedesmus dimorphus is a unicellular algae in the class Chlorophyceae (green algae). While this is one preferred species for oil yield for biodiesel, one of the problems with Scenedesmus is that it is heavy, and forms thick sediments if not kept in constant agitation. Dunaliella tertiolecta is a marine green flagellate with a size of 10 to 12 μm in diameter. This strain is said to have an oil yield of about 37%. D. tertiolecta is a fast growing strain, therefore allowing it to have a high carbon dioxide rate (Wikipedia-Dunaliella).
Processes converting algae oil to biodiesel
Algal oil is converted into biodiesel through a transesterification process. Oil extracted from the algae is mixed with alcohol and an acid or a base to produce the fatty acid methylesters that makes up the biodiesel. If biomass is grown in a sustained way, its combustion has no impact on the CO2 balance in the atmosphere, because the CO2 emitted by the burning of biomass is offset by the CO2 fixed by photosynthesis.
Look at transesterification equation. (Hossain et al., 2008)
Biodiesel is defined as the mono-alkyl esters of vegetable oils or animal fats. Biodiesel is produced by transesterifying the parent oil or fat to achieve a viscosity close to that of petrodiesel. The chemical conversion of the oil to its corresponding fatty ester (biodiesel) is called transesterification. Biodiesel is a biodiesel commonly consisting of methyl esters that are derived from organic oils, plant or animal, through the process of transesterification (see reaction). An excess of methanol is used to force the reaction to favor the right side of the equation. The excess methanol is later recovered and reused (Demirbas & Demirbas, 2010).
The process of producing microalgal oil consists of microalgal biomass production step that requires light, carbon dioxide, water and inorganic nutrients (nitrates, phosphates, and iron). About half of the dry weight of microalgal biomass is carbon, which is usually derived from carbon dioxide. Therefore, producing 100 tons of algal biomass fixes roughly 183 tons of carbon dioxide. Optimal temperature for growing many microalgae is between 293 and 303 K. A temperature outside this range could kill or damage the cells.
Expeller/Press, solvent extraction with hexane and supercritical fluid extraction are well-known methods to extract oil from algae. A press/expeller extracts 70-75% of the oils out of algae. Using chemicals like Hexane (which are relatively inexpensive) can also be used to extract algal oils. Supercritical fluid extraction is more efficient than solvent separation methods. Because supercritical fluids are selective, they provide high purity and product concentrations. This can extract nearly 100% of the oils. In the supercritical fluid carbon dioxide (CO2) extraction, CO2 is liquefied under pressure and heated to the point that it hast the properties of both a liquid and gas. This liquefied fluid then acts as the solvent in extracting the oil. After oil extraction from algae, the remaining biomass fraction can be used as a high protein feed for livestock. This gives further value to the process and reduces waste.
Photosynthesis is the first step in the conversion of light to chemical energy and ultimately responsible for driving the production of feedstocks required for a wide range of fuel synthesis (figure1): protons and electrons (for biohydrogen), sugars and starch (for bioethanol), oils (for biodiesel) and biomass (for biomass to liquid, biomethane) (Schenk et al., 2008).
In green algae, light is captured by specialized light harvesting complex proteins, referred to as LHCI and LHCII (figure 1). Their expression is dependent on environment conditions (light intensity). These proteins bind a large amount of the chlorophyll and carotenoids in the plant and play a role in both light capture and in the dissipation of excess energy, which would otherwise inhibit the photosynthetic reaction centers (photosystem II). Excitation energy used to drive the photosynthetic reactions is funneled to the photosynthetic reaction centers of photosystem I (PSI) and PSII via the network of pigments bound by the LHC, PSII, and PSI subunits. In the first stop PSII uses this energy to drive the photosynthetic water splitting reaction, which converts water into protons, electrons and oxygen. The electrons are passed along the photosynthetic electron transport chain via plastoquinone (PQ), cytochrome b6f (Cyt b6f), PSI, and ferredoxin (Fd) and on to NADPH. At the same time, protons are released into the thylakoid lumen by PSII and the PQ/PQH2 cycle. This generates a proton gradient, which drives ATP production via ATP synthase. The protons and electrons are recombines by ferredoxin-NADP+ oxidoreductase (FNR) to produce NADPH. NADPH and ATP are used in the Calvin cycle to produce the sugars, starch, oils that are required to produce bioethanol, biodiesel, and biomethane (Schenk et al., 2008).
The Calvin cycle is an integral part of the photosynthetic process and responsible for fixing CO2 in a diverse range of organisms including primitive algae through to higher plants. The process uses ATP and NADPH generated by the light reactions (Schenk et al., 2008).
Photosynthesis is the fundamental driving force that supports all biofuel synthetic processes, converting solar energy into biomass, carbon storage products (carbohydrates and lipids) and hydrogen (figure 1) (Beer et al., 2009).
Greater light capture and conversion efficiencies ultimately lead to reduced fertilizer and nutrient inputs and so result in less waste and pollution. Microalgae are known to grow more abundantly in nutrient-rich water leading frequently to algal blooms. Once the algal population reaches its limits (either due to nutrient depletion or high cell densities that limit light penetration) a large number of the algal cells die (Schenk et al., 2008).
Most of algal species are phototrophs and therefore require light for their growth. The phototropic microalgae are commonly grown in open ponds and photobioreactors. Open pond systems are shallow ponds in which algae are also cultivated. The open pond cultures are economically more favorable, but raise the issues of land cost, water availability, and appropriate climatic conditions. Photobioreactors are different types of tanks or closed systems in which algae are cultivated. Photobioreactors offer a closed culture environment, which is protected from invading microorganisms. This technology is relatively expensive compared to the open ponds because of the infrastructure costs. However, closed systems require less light and agriculture land to grow the algae. High oil species of microalgae cultured in growth-optimized conditions of photobioreactors have the potential to yield 19,000-57,000 l of microalgal oil per acre per year. An ideal biomass productions system should use the freely available sunlight (Demirbas & Demirbas, 2010).
Open pond systems
Open ponds have a variety of shapes and sizes but the most commonly used design is the raceway pond. An area is divided into a rectangular grid, with each rectangle containing a channel in the shape of an oval; a paddle wheel is sued to drive water flow continuously around the circuit. Raceway ponds are more expensive construct due to the extra infrastructure required (paddle wheel) and the faster flow rates mean more stable structures are required to ensure that the pond integrity is maintained. Open ponds are easy to maintain since they have large open access to clean off the biofilm that builds up on surfaces. The disadvantage of open systems is that by being open to the atmosphere, they lose water by evaporation at a rate similar to land crops and are also susceptible to contamination by unwanted species. Over time undesired species will inevitably be introduced and can reduce yields and even outcompete the desired algal culture (Schenk et al., 2008).
The most cost-effective way to farm microalgae is in large, circulating ponds. Closed photobioreactors provide sterility and allow for much greater control over culture parameters such as light intensity, carbon dioxide, nutrient levels, and temperature. Under optimal conditions, microalgal populations are capable of doubling within hours and achieving high cell densities (Rosenberg et al., 2008). Besides saving water, energy and chemicals, closed bioreactors have many other advantages, which are increasingly making them the reactor of choice for biofuel production, as their costs are reduced (figure 3). They support up to fivefold higher productivity with respect to reactor volume and therefore have a smaller “footprint” on a yield basis. This is optimal because the goal is to collect as much solar energy as possible from a given piece of land. Most closed photobioreactors are designed as tubular reactors, plate reactors, or bubble column reactors (figure 3). To increase efficiency, photobioreactors have to be designed to distribute light over a large surface area in order to provide moderate light intensities for the cells (light dilution). This is usually achieved by arranging tubular reactors in a fence-like construction. The fences are oriented in a north/south direction to prevent direct bright light hitting the surface. In this way sunlight is diluted in a horizontal and vertical direction (Schenk et al., 2008). Tubular photobioreactors seem to be most efficient in producing algal biomass on the scale needed for biofuel production. A tubular photobioreactor consists of an array of straight transparent tubes that are usually made of plastic or glass. This tubular array, or the solar collector, captures the sunlight for photosynthesis. The solar collector tubes are generally less than 0.1 m in diameter to enable the light to penetrate into a significant volume of the suspended cells…process continues (Christi, 2007).
For large-scale microalgae biofuel production there would need to be a series of photobioreactors of increasing size. As the bioreactors increase in size, the level of complexity should be reduce to minimize the cost per square meter. It is important to use an algal species that is both, fast growing during the inoculum scale-up stage and highly productive in the final open pond stage. This process allows for low nutrient conditions to avoid the dominance of invading species while encouraging the continuous production of algal biofuels (Schenk et al., 2008).
Economics of algae biodiesel production
Photobioreactors require 10 times capital investment than open pond systems. The estimated algal production cost for open pond systems ($10/kg) and photobioreactors ($30-$70/kg) is two order magnitudes higher than conventional agricultural biomass respectively. Assuming that biomass contains 30% oil by weight and carbon dioxide available at no cost, estimated production cost for photobioreactors and ponds to be $1.40 and $1.81 per liter of oil respectively. However, for microalgal biodiesel to be competitive with petrodiesel, algal oil price should be les than $0.48/L. It has been estimated that 0.53 billion m3 of biodiesel would be needed to replace current US transportation consumption of all petroleum fuels. The per unit area yield of oil from algae is estimated to be from 18,927 to 75,708 l per acre, per year; this is 7-31 times greater than the next best crop, palm oil.
To produce this quantity (0.53 billion) of biodiesel, palm oil would need to be grown over an area about 111 million (M) hectares. This is nearly 61% of all agricultural cropping land in the United States. Growing palm oil at this scale would be unrealistic because insufficient land would be left for producing food and other crops (Christi, 2007).
Reasons why algae biomass cultivation has potential
Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. Advantages of microalgal systems: 1) they have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare), 2) they can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil, 3) can utilize salt and waste water streams, thereby reducing freshwater use, 4) can couple CO2-neutral fuel production with CO2 sequestration, 5) produce non-toxic and highly biodegradable biofuels (Schenk et al., 2008).
Advantages of biodiesel from algae oil: rapid growth rates, grows practically anywhere, a high per-acre yield (7-31 times greater than the next best crop—palm oil), algae biofuel is non-toxic, algae biofuel is highly bio-degradable, high levels of polyunsaturates in algae biodiesel is suitable for cold weather climates, can reduce carbon emissions based on where it’s grown (Schenk et al., 2008).
Disadvantages of biodiesel from algae oil: produces unstable biodiesel with many polyunsaturates, biodiesel performs poorly compared to its mainstream alternative, relative new technology (Demirbas & Demirbas, 2010).
Algae have the potential of growing in places away from the farmlands and forests, thus minimizing the damages to the ecosystem and food chain supply. Algae can also be grown in sewage and next to power-plant smokestacks, where they can digest the pollutants and deliver the oil (Vijayaraghavan & Hemanathan, 2009).
Algae biomass can be produced at high volumes and this biomass can yield a higher percentage of oil than other sources. Algae oil has limited market competition. Algae can be cultivated on land, fresh water, or seawater. Innovations to algae production allow it to become more productive while consuming resources that would otherwise be considered waste.
Biodiesel derived from oil crops is a potential renewable and carbon neutral alternative to petroleum fuels. But, biodiesel from oil crops, waste cooking oil and animal fat cannot fulfill a small fraction of the existing demand for transport fuels. Microalgae appear to be the only source of renewable biodiesel that is capable of meeting the global demand for transport fuels.
At right is a sample image insertion. It works for any image uploaded anywhere to MicrobeWiki. The insertion code consists of:
Double brackets: [[
Thumbnail status: |thumb|
Pixel size: |300px|
Placement on page: |right|
Legend/credit: Electron micrograph of the Ebola Zaire virus. This was the first photo ever taken of the virus, on 10/13/1976. By Dr. F.A. Murphy, now at U.C. Davis, then at the CDC.
Closed double brackets: ]]
Overall text length at least 3,000 words, with at least 3 figures.
[Sample reference] Takai, K., Sugai, A., Itoh, T., and Horikoshi, K. "Palaeococcus ferrophilus gen. nov., sp. nov., a barophilic, hyperthermophilic archaeon from a deep-sea hydrothermal vent chimney". International Journal of Systematic and Evolutionary Microbiology. 2000. Volume 50. p. 489-500.