Talk:Shewanella oneidensis MR-1: Background and Applications: Difference between revisions

From MicrobeWiki, the student-edited microbiology resource
No edit summary
No edit summary
Line 5: Line 5:


==Brief History==
==Brief History==
<br>Shewanella was originally identified in 1931 as one of multiple species of bacteria growing on putrid butter (Hammer, 1931). It was first classified as part of the genus Achromobacter and was reclassified multiple times on the basis of its polar flagella, its status as a non-fermentive marine bacteria, and the guanine/ cystine content (% GC) of its DNA (Gralnick et al., 2007). In 1985, 5S rRNA sequencing was used support an entirely new name for the genus, Shewanella. The name was given as a tribute to Dr. James M. Shewan for his work in fisheries microbiology (MacDonell et al., 1985).<br>
<br>Shewanella was originally identified in 1931 as one of multiple species of bacteria growing on putrid butter (Derby et al., 1931). It was first classified as part of the genus Achromobacter and was reclassified multiple times on the basis of its polar flagella, its status as a non-fermentive marine bacteria, and the guanine/ cystine content (% GC) of its DNA (Gralnick et al., 2007). In 1985, 5S rRNA sequencing was used support an entirely new name for the genus, Shewanella. The name was given as a tribute to Dr. James M. Shewan for his work in fisheries microbiology (MacDonell et al., 1985).<br>


===Model Species of the Genus Shewanella: <i>Shewanella oneidensis MR-1</i>===
===Model Species of the Genus Shewanella: <i>Shewanella oneidensis MR-1</i>===

Revision as of 01:39, 25 April 2011

Introduction

Figure 1. Shewanella onedensis MR-1 growing on hematite. Shewanella are gram-negative, proteobacteria that are facultative anaerobes and can respire on a tremendous variety of inorganic and organic electron acceptors. One such electron acceptor is Fe2O3, which is commonly found in the clay hematite. (Photo from Oak Ridge National Laboratory; http://www.ornl.gov/info/ornlreview/v37_3_04/article02.shtml).


The genus Shewanella consists of gram-negative proteobacteria that are typically rod shaped, 2-3 μm in length and 0.4-0.7 μm in diameter (Fig 1). These facultative anaerobes are often found in marine sediments, and can swim with the aid of a single polar flagellum (Venkateswaran et al., 1999). Since the modern characterization Shewanella in 1988, DNA:DNA hybridization and 16S rRNA sequencing has been used to identify more than 40 distinct species. The features that characterize this genus include psychrotolerance, mild halophilicity, and the capacity to reduce an unparalleled array of inorganic and organic compounds for respiration (Gralnick et al., 2007). Their capacity to respire on various metals as well as their production of endogenous hydrocarobons has ignited tremendous interest in the characterization and potential applications of these microorganisms.

Brief History


Shewanella was originally identified in 1931 as one of multiple species of bacteria growing on putrid butter (Derby et al., 1931). It was first classified as part of the genus Achromobacter and was reclassified multiple times on the basis of its polar flagella, its status as a non-fermentive marine bacteria, and the guanine/ cystine content (% GC) of its DNA (Gralnick et al., 2007). In 1985, 5S rRNA sequencing was used support an entirely new name for the genus, Shewanella. The name was given as a tribute to Dr. James M. Shewan for his work in fisheries microbiology (MacDonell et al., 1985).

Model Species of the Genus Shewanella: Shewanella oneidensis MR-1


In 1988, a group of scientists became curious about the unexplained levels of reduced manganese (Mn2+) present in New York’s largest freshwater lake, Lake Oneida (Fig 2). In nature, manganese generally exists in its oxidized form (Mn4+), and thus the scientists hypothesized that some biological process was reducing the manganese. Upon experimentation, they discovered a species of Shewanella that respires by transferring electrons to Mn4+. Interestingly, oxidized manganese is insoluble, which indicated that the bacteria have a way to transfer electrons to metal outside of their cells for respiration. After rRNA sequencing, the bacteria was characterized as a Shewanella , and the species was named Shewanella oneidensis MR-1 (“manganese reducer”) after the lake in which it was discovered (Slonczewski et al, 2011). This MR-1 species was the first shewanella to genome to be sequenced, and thus it has become a model system for the study of the genus (Gralnick et al., 2007).

Mechanism of Action for Metal Reduction: Biofilm Formation


The ability to respire on insoluble substances is a true biological feat that scientists have begun to deeply investigate. The first step to successful reduction of extracellular metals is the formation of biofilms by shewanella on the metal oxide. Biofilms facilitate close contact between the bacteria and the oxidized metal (Thormann et al., 2004). A study by Thormann et al. (2004) investigated mechanism of biofilm formation by Shewanella oneidensis MR-1 on glass surfaces. They reported that the microbes first attach and grow laterally until they cover the majority of the surface available to them. The Shewanella then begin to develop the biofilm vertically creating towering structures (Fig 3). Using mutagenesis experiments, the scientists discovered that the microbes do not need to swim in order to attach to the surface. The swimming motility is actually critical to formation of the three dimensional structures. Instead, the biosynthesis of a type IV pilus (Fig 4A) is crucial to microbe to surface adhesion and the ability to retract pili (Fig 4B) is required for lateral coverage by the biofilm. The scientists also reported that the Shewanella grow more robust biofilms, with greater microbe to surface interactions, when nutrient levels are poor (Fig 5). This probably happens because when nutrient levels are high in the media and oxygen is available (as was the case in this experiment), the organisms can simply catabolize the nutrients aerobically rather than investing energy in the formation of a biofilm for low energy-yielding respiration. However, the typically anaerobic natural environments of Shewanella encourage biofilm formation, which allows them to thrive on nutrients that most other organisms cannot use.

Transfer of Electrons: Cytochromes and Riboflavins


Once the biofilm adhering the microbe to the metal is formed, molecules are required to transfer electrons from the microbial cell to the metal for respiration. Some of the most important molecules for this transfer are called cytochromes, which are electron transport proteins that associate small, reversible energy transitions with electron transfer. Cytochrome proteins consist of the protein structure containing a heme cofactor (Fig 6). The heme cofactor is composed of a ring of conjugated double bonds surrounding an iron atom. Double bonds and iron atoms can acquire and transfer electrons because they have narrowly spaced energy levels that facilitate small energy transitions. These small energy transitions prevent the loss of energy as heat, and instead, energy can be converted to small process such as the pumping of protons across a membrane or the reduction of metals (Slonczewski et al, 2011).


In nature, there are various types of cytochromes, and Shewanella oneidensis MR-1 has been reported to contain at least 42 putative cytochrome c molecules (Meyer et al., 2004). The cytochrome c molecules of Shewanella have multiple heme groups and exist in the inner membrane (CymA), the periplasm (MtrA), and the outer membrane (MtrC and OmcA). The outer membrane cytochromes, MtrC and OmcA, are lipoproteins associated to the outer membrane and the outer membrane proten MtrB (Fig 7). They are fixed in the outermembrane by the type II protein secretion pathway (Fig 8). In this position MtrC and OmcA cytochromes are exposed to the extracellular environment where they can contact with metals to which they transfer electrons. These outer membrane cytochromes are so crucial to metal reduction that Shewanella putrefaciens MR-1 species that are missing OmcA and MtrC are 45% and 75% slower respectively at reducing MnO2 than non-mutated strains (Myers et al., 2001). While the function of most of the other cytochrome c variants have yet to be elucidated, some have been implicated in fumurate, nitrate, and DMSO reduction (Fredrickson, et al., 2008).

Riboflavins


In Figure 7, the reduction on the left depicts intermediate flavins as part of the metal reduction pathway because they have been shown to shuttle electrons to metals that do not contact extracellular cytochromes. Riboflavins, otherwise known as vitamin B2 (Figure 9), have conjugated double bonds that allow the small energy transitions useful for the carrying electrons. Further, its largely polar tale increases the solubility of riboflavin such that it can shuttle electrons from cell surface to external metals. Marsili et al. (2007) discovered the use of riboflavins as soluble electron shuttles when the media surrounding biofilms of Shewanella oneidensis MR-1 was removed and electron transfer dropped by > 70%. In organisms that use strictly outer membrane cytochromes, such as Geobacter, the removal of the media surrounding the biofilm has a minimal affect on rates of electron transfer (> 5%). This finding suggested that Shewanella produce a molecule that completely dissociates from the membrane and moves freely in the media. When the components of the media were characterized using reverse phase liquid chromatography coupled with secondary mass spectroscopy (LC-MS), the soluble, electron carrier riboflavin was identified. The study also demonstrated that riboflavins quickly adhere to Fe3+ and Mn4+, which are commonly reduced by Shewanella further supporting the hypothesis that riboflavins act as electron shuttles for the microbes. The production of riboflavins helps explain the ability of Shewanella to transport electrons to metals that are > 50 μm away from the cell surface (Lies et al., 2005).

Transfer of Electrons: Nanowire Synthesis


Along with cytochromes and riboflavins, Shewanella oneidensis MR-1 have also been shown to synthesize pilus-like, electrically conducive appendages known as bacterial nanowires. Gorby et al. (2005) viewed these nanowires using scanning electron microscopy in Shewanella that had been exposed to very low oxygen conditions or anaerobic conditions with low concentrations of electron acceptors such as Fe3+ or fumurate. By contrast, Shewanella that were exposed to high oxygen conditions (O2 > 2% air saturation) did not produce confluent biofilms or extensive nanowires (Fig. 10). The nanowires were 50-150 nm in diameter and extended tens of microns or longer connecting the bacteria to each other as well as to the surface on which the biofilm is growing. Further, while Geobacter produces long thin filaments as nanowires, Shewanella seem to package multiple filaments together into a type of conductive cable.


The group demonstrated that these extracellular appendages transmit current by incubating Shewanella with an aqueous suspension of the poorly crystalline silica hydrous ferric oxide (Si-HFO). When they viewed the cultures with transmission electron microscopy, they discovered that the Si-HFO had been transformed to the reduced form of nanocrystalline magnetite along the extracellular features, which were consistent with the dimensions of nanowires. Further, when they visualized samples from the top of the medium, they also found crystalline solid-phase iron oxide (Fig 11). Since there were no cells present at the top of the media, this finding suggests that the nanowires could stretch a significant distance from the cells in order to reduce the aqueous iron oxide, transforming it into crystalline structures (Gorby et al., 2005). In a later study, Gorby et al. (2010) directly measured the conductivity of the nanowires by putting nanofabricated electrodes at the top of the nanowires. They also tested whether nanowires could bridge a metallic electrode and the conductive tip of an atomic force microscope. Using these methods, they discovered that the nanowires are conductive along a micrometer length scale and can transport electrons at rates up to 109/s at 100 mV of applied bias and 1 Ω*cm of resistivity.


Finally, mutagenesis experiments indicated that mutants missing the MtrC and OmaC cytochromes produce filaments that are not electrically conducive. Specifically, filaments produced by mutants did not solidify aqueous iron-oxide, nor did they transmit a current when contacted with the nanofabricated electrodes (Gorby et al., 2010). Thus, these outer membrane cytochromes may act as “intermediate” electron carriers for the nanowires or have some other role in the conductivity of these filaments (Gorby et al., 2005).


Application: Microbial Fuel Cells (MFCs)


The three methods of extracellular metal reduction have given Shewanella incredible metabolic versatility that scientists are eager to harness. The first application of Shewanella microbes has been the development of microbial fuel cells. Fuel cells (such as batteries) generate electricity by separating the electron donor (anode) from the electron acceptor (cathode) such that electrons must pass through some resistor (any a product that requires electricity: calculator, flashlight, car) in order to reach the electron acceptor. Traveling from an electron donor to an electron acceptor is a favorable and spontaneous process for electrons, and as an electron current travels through resistors, it powers appliances (Logan et al. 2006).


Microbial fuel cells (MFCs) harness the electrons generated by bacteria (for respiration) to power fuel cells. Specifically, the microbial biofilms are grown on the anode where they separate hydrogens from the substances provided to them as food (microbial food can include wastewater, acetate, formaldehyde, etc). In order to reach the cathode (spontaneous reaction), electrons must travel through the resistor, and the protons left beyond move to the cathode through a proton exchange membrane. At the cathode, oxygen can act as a terminal electron acceptor and the electrons and protons are combined with oxygen to make water (Fig 12; Slonczewski et al., 2001)

Transferring Electrons from Bacteria to the Anode


Microbial fuel cells have helped reveal the importance of electron shuttles, such as riboflavins, and nanowires in bacterial respiration. Particularly, confocal scanning laser microscopy of biofilms on the anodes has revealed that some of the viable, electron-transferring bacteria are actually at a distance from the anode. When bacteria on the anode were live-dead stained (red is dead and green is live), live cells were found in 3 dimensional structures tens of microns away from the anode surface. Further, dead bacteria were found directly on the anode surface perhaps because they had adhered there and then were unable to use the anode as an electron acceptor (Fig 13; Logan et al., 2006). Thus, the bacteria at the tops of the bacterial mounds must use either electron shuttles, such as riboflavins, or nanowires to reach the anode and maintain their metabolism.

Potential Uses of MFCs


Because MFCs generate electricity and can be fueled by any organic substance, they show great potential as alternative wastewater treatment reactors. Current wastewater treatment machines are high-cost and spend electricity. Thus, replacing them with MFCs would be an economically feasible way of producing energy as well as cleaning water (Logan et al., 2006). Further, recent studies indicate that MFCs produce enough energy to act as power sources for long-term, un-manned data collecting devices such as monitoring devices for environment and water treatment (Lowy et al,. 2006).

MFCs and Clean Energy


Aside from small monitoring devices and wastewater treatment, using MFCs to produce electricity on a large scale will be difficult because of their inefficiencies (see section 3.3). However, MFCs can be easily altered to produce hydrogen gas rather than electricity. Specifically, hydrogen gas is a high energy molecule that has been proposed as a cleaner alternative to petroleum because burning it produces only water rather than exhaust fumes, which cause tremendous pollution and have been implicated in global climate change. However, hydrogen is not produced naturally in large quantities and thus some type of fossil fuel combustion or other energy source is required to split water (water electrolysis) for hydorgen production (Hydrogen Fuel Cells, 2006). MFCs offer an interesting alternative to hydrogen production because removing oxygen from the cathode and applying a small voltage (~0.25 V) results in the production of hydrogen gas at the cathode. This is called bacterial electrolysis of organic matter because the electrons and hydrogens come from organic matter rather than water (Rozendal et al., 2007). While the splitting of water to make hydrogen gas is highly endothermic and thus requires an input of energy (~1.8 V), bacterial electrolysis is very slightly exothermic, enough so to provide energy to the bacteria. Adding a small amount of voltage (~0.25 V), gives bacterial electrolysis enough energy to produce hydrogen gas. Overall, hydrogen production by bacteria represents a net energy gain by a factor of 5.8 when compared to the net loss of energy required for water electrolysis (Logan et al., 2006). Thus, the MFCs hold great potential as efficient hydrogen producers.

Challenges of Microbial Fuel Cells


Although microbial fuel cells show great potential as sources of energy for wastewater treatment, monitoring devices, and hydrogen production, their efficiency is a continual challenge. Particularly, if the anode is not well sealed, oxygen can leak in providing an alternative electron acceptor to the bacteria such that they can respire without generating electricity (Liu et al., 2004). Further, wastewater contains a plethora of alternative electron acceptors, such as nitrate or sulfate, which can also be used as alternatives to the cathode so the bacteria will respire without producing electricity (He et al., 2005). Improving the efficiency of MFCs requires advanced infrastructure of the cell itself such as separate chambers for the anode and cathode to prevent leakage of electron acceptors. Further, running the cell at a higher power density also tends to increase efficiency perhaps because there is less time for electrons to be lost to alternative acceptors. These challenges are likely to be overcome through further study of the MFC infrastructure and the bacteria that colonize the anodes (Logan et al., 2006).



Conclusion


Overall paper length should be 3,000 words, with at least 3 figures.

References

[Sample reference] Takai, K., Sugai, A., Itoh, T., and Horikoshi, K. "Palaeococcus ferrophilus gen. nov., sp. nov., a barophilic, hyperthermophilic archaeon from a deep-sea hydrothermal vent chimney". International Journal of Systematic and Evolutionary Microbiology. 2000. Volume 50. p. 489-500.

Edited by student of Joan Slonczewski for BIOL 238 Microbiology, 2009, Kenyon College.