Tuberculosis disease

From MicrobeWiki, the student-edited microbiology resource
This student page has not been curated.
Mycobacterium tuberculosis under microscope [1]

Etiology/Bacteriology

Taxonomy

Mycobacterium tuberculosis Acid Fast Stain [2]




Kingdom: Bacteria
Phylum: Actinobacteria
Class: Actinobacteria
Order: Actinomycetales
Family: Mycobacteriaceae
Genus: Mycobacterium
Species: tuberculosis

Mycobacterium tuberculosis Cell Wall Structure [3]





Description

Mycobacterium tuberculosis is an acid fast, nonmotile, obligate anaerobe. These bacilli range in size from 2-4 µm and have an incredibly slow generation time of 15 to 20 hours. The genus of Mycobacterium is defined by the mycolic acids and waxes, which makes the bacterium resistant to many bactericidal agents. For this reason, the tuberculosis disease can be easily spread due to the difficulty in killing the bacteria. Mycobacterium tuberculosis is very diverse and provides different geographic areas with different disease symptoms [3].

Pathogenesis

Transmission

Much too contrary belief, the only method by which tuberculosis (TB) is spread, is through airborne particles from person to person. If a healthy human were to breathe in the bacteria that escaped the lungs of an infected individual who coughed, sneezed, or even spoke, they will contract the disease. With Mycobacterium tuberculosis being able to colonize and affect many different parts of the body, the only contagious form of the disease is pulmonary tuberculosis [4].


HIV Patient Infected with Tuberculosis Disease[4]

Infectious Dose, Incubation, and Colonization

Mycobacterium tuberculosis has an incredibly low infectious dose of less than 10 [4], as well as a long incubation period of two to twelve weeks [6]. Mycobacterium tuberculosis that infects the lungs is inhaled by the host and engulfed by the macrophages of the alveoli. These bacteria can now lay dormant or begin to reproduce inside the macrophages, which triggers the infection to occur.

Epidemiology

Tuberculosis is a disease that must be reported to the CDC when a positive diagnosis has been reached. It is due to this reason that the CDC has the exact numbers on incidences in the United States from 1953-2011. It has been stated that TB is one of the deadliest diseases in the world. According to the CDC, approximately one-third of the entire population is infected with Mycobacterium tuberculosis. There were close to 9 million people in the world diagnosed with TB disease in 2011, and 1.4 million deaths were related to tuberculosis infection or disease. Of these 9 million people with tuberculosis disease 10,528 were in the United States. With HIV leaving its host immunocompromised, they are unable to cope with this disease, leaving TB as the number one killer of HIV positive patients [4].

Virulence Factors

Mycobacterium tuberculosis is unique in the fact that it does not invade a host and succeed in disease through the same virulence factors as other notable pathogens. The research in the topic of how M. tuberculosis specifically invades and infects a host is at the forefront of up and coming research [10].

  • Tricarboxylic Acid Cycle (TCA)
    While this may not be considered a virulence factor, it is necessary for M. tuberculosis to be persistent in invading the hosts immune system. This bacterium has evolved a metabolism ideal to remain active in host macrophages. The tricarcoxylic acid cycle relies on fatty acids to provide the bacteria with energy and fuel to thrive. [8].
  • Hypoxia Adaptations
    M. tuberculosis’ ability to reside in a host and potentially be asymptomatic for years is what allows this disease to succeed in killing its hosts. This idea of adapting hypoxia is very new and thought to allow these bacteria to drastically mutate, eventually creating drug resistance. With the ability to rapidly tolerate antibiotics that used to kill the bacteria, Mycobacterium tuberculosis is able to continue degrading the host immune system. Exhaustion is a definite symptom of tuberculosis disease, which is due to the bacteria shifting their primary nutrients to lipids that serve to produce energy for the host. This ability for M. tuberculosis to breakdown and utilize the hosts lipids can be directly associated with the mycolic acids in its cell wall that determine it to be an acid fast bacterium [9].
  • Elements Specific to Cell Surface
  • Mycobacterium tuberculosis does not secrete toxins that negatively affect the host, but rather it secretes enzymes and proteins that aid in the production of molecules presented on the surface of the cell. These enzymes and proteins allow for the bacterium to have its complex and extremely durable cell wall and envelope. The cell wall and envelope found on the M. tuberculosis is completely unique to these bacteria and allow for the ultimate success of the pathogens. The role of each protein expressed on the cell surface has a distinct function and responsibility [10].
  • Sigma Factors
  • Sigma factors play a large role in any prokaryotic and allow for such quick changes on the basis of environment. The most important sigma factor to Mycobacterium tuberculosis is sigma A, which allows for the bacteria to express new virulence and mutate. This sigma factor must work with a trascriptional activator that expresses genes essential to the pathogens invasion [10].

    Clinical Features and Symptoms

    Mycobacterium tuberculosis presented via X Ray [5]

    There are multiple forms of tuberculosis which is separated into two categories; pulmonary and extrapulmonary tuberculosis. It is important to note due to its slow development, TB symptoms can take months to years to begin. If the tuberculosis bacteria invades the body without causing symptoms it is considered latent, whereas active TB causes symptoms to arise.

    Pulmonary TB symptoms include:

    • More than three weeks of chronic coughing in which phlegm is present. It is not abnormal for blood to be present in the phlegm
    • Shortness of breath, which will continue to worsen as the disease worsens
    • Weight loss due to a loss of appetite
    • Excessive sweating while sleeping
    • Intense lack of energy
    • Body aches and pains that have occurred for greater than three weeks

    Extrapulmonary TB diseases and symptoms include:

    Lymph Node Tuberculosis

    • Painless lymph node swelling; any nodes in the body can be affected, but the most common place is the neck
    • The constant swelling of the lymph nodes causes the fluid to eventually leak through the barrier of the skin
    Clinical Presentation of Pott's Disease [6]

    Skeletal Tuberculosis (Pott’s Disease)

    • Painful bones
    • The infected bone will begin to weaken and become curved
    • Absence of feeling and movement in the diseased bone
    • Due to the bone being weakened, it has a high risk of being fractured

    Gastrointestinal Tuberculosis

    • Diarrhea
    • Bleeding from the rectum
    • Pain in the abdominal region

    Genitourinary Tuberculosis

    • Urethral burning while urinating
    • Presence of blood in urine
    • Persistent need to urinate
    • Aches and pain in the groin

    Central Nervous System Tuberculosis

    • Presence of headaches
    • Brain swelling
    • Neck stiffness
    • Illness
    • Decrease in vision
    • Deterioration in mental awareness
    • Onset of seizures [2]

    Diagnosis

    If the patient is experiencing the symptoms described above it is highly likely they will be tested for the presence of Mycobacterium tuberculosis in their body. The evaluation process for a disease as serious as tuberculosis is a daunting one, but physicians need to be absolutely sure to produce a proper diagnosis. The steps for diagnosing a patient presenting with symptoms similar to TB include:

    • Obtaining the patients’ medical history:
    • Health care providers must determine if the patient has been exposed to TB, as well as illnesses that leave the patient immunodeficient. Demographic, such as age and occupation are important factors in determine if the patient is in an at risk group for contracting TB.
    • A thorough physical examination:
    • This can allow for health care providers to asses overall health and knowledge that will lead to the treatment, if the patient is determined to be infected with Mycobacterium tuberculosis.
    • Testing for the presence of Mycobacterium tuberculosis:
    • The two most common tests are the Mantoux tuberculin skin test (TST) and the TB blood test. The TST is accomplished by injecting 1/10th of a milliliter (mL) of tuberculin is injected into the patient’s skin, usually in the mid forearm. 48-72 after the injection, a health care provider reads the test and documents the results. If there is no reaction, the test is considered negative, however if redness and swelling occur the presentation of the reaction determines if a test is considered positive or not. 5 mm of hard swelling will be considered positive if the patient:
      Mantoux tuberculin skin test (TST) [7]
      • Has been diagnosed with HIV
      • Is immunodeficient
      • Has ever had an organ transplant
      • Has come into contact with someone who has active TB
      • Has worsening chest X-Rays

      10 mm or greater of hard swelling will be considered positive if the patient:

      • Has presented with a negative test within 2 years
      • Has a condition that increases their chances of contracting TB
      • Is a health care professional
      • Is an intravenous (IV) drug user
      • Immigrants from a country with a high rate of TB who moved to the United States less than 5 years ago
      • Is under the age of four years old
      • Is exposed to high risk adults, and are infants, children, or teenagers
      • Is frequently in an area of high TB risk, such as homeless shelters and jails

      Any test with results 15 mm or larger of hard swelling will be considered positive whether is patient is at risk or not [5].

    • Chest X-Ray or more in depth studies if needed:
    • This is not a test that can allow a physician to diagnose a patient with TB, but can rule out pulmonary TB if a patient has presented with a positive TST or blood test.
    • Culturing of the samples taken from the patient:
    • This method of culturing the bacteria is the only definitive way to diagnose a patient with a Mycobacterium tuberculosis infection. All positive results of this test must be reported to the primary care physician and the state.
    • Testing the Mycobacterium tuberculosis for drug resistance, due to possibility of having drug resistant tuberculosis (MDR TB) or worse, extremely drug resistant tuberculosis (XDR TB):
    • This is incredibly important because if the M. tuberculosis strain is resistant, then an appropriate regiment needs to be prescribed to the patient to ensure the best scenario of curing the disease [4].

    Treatment

    Antibiotic Regiment for Patients with Latent TB [8]

    There are multiple treatments for tuberculosis, because the patient could be diagnosed with a latent TB infection or TB disease. Only if the risk of TB outweighs those of the antibiotics is a patient treated. If it is decided that action is needed TB is treated with the antibiotics isoniazid (INH), rifampin (RIF), and rifapentine (RPT). There are four different treatment routines that include isoniazid daily for nine months, isoniazid daily for six months, isoniazid and rifapentine once a week for three months, or rifampin daily for 4 months. The regiment of isoniazid and rifapentine is one that is to be taken along with directly observed therapy (DOT), due to the high risk of liver damage and death. Due to the tragic side effects, the grouping of isoniazid and rifapentine is strongly discouraged and rarely prescribed [4]. Tuberculosis disease is treated with the four antibiotics isoniazid (INH), rifampin (RIF), ethambutol (EMB), and pyrazinamide (PZA). The treatment for pulmonary TB has two steps, starting with a combination of isoniazid, rifampicin, pyrazinamide, and ethambutol once a day for two months. The next four months of treatment consist of the patient taking only isoniazid and rifampicin for another four months. Extrapulmonary TB is treated with the same antibiotics used for pulmonary TB; INH, RIF, EMB, and PZA. The length of time needed to cure this form of TB is longer, therefore, antibiotics are prescribed to be taken during a twelve month span. If M. tuberculosis is to colonize in the patient’s brain, a corticosteroid will be prescribed for approximately a month in addition to the antibiotic regiment. This corticosteroid is prescribed to control the swelling around the brain as a result of the TB. It is crucial that patients take every dose of antibiotics as instructed for the indicated amount of time to be sure all the bacteria is killed and resistance does not occur [2].

    Prevention

    There is currently a vaccine, Bacillua Calmette-Guerin (BCG), which aims protect certain groups from the disease, although is 100% effective. The criteria for this vaccine varies depending on the country one resides. In the United States, a vaccine is not given until the set guidelines have been met and the patient has been seen by a doctor considered an expert with the TB disease. The guidelines broken down into two categories for the United States are:
    Children

    • An accredited hospital has recorded the patient is TB positive, through the reading of a skin test
    • The child must remain in contact with persons diagnosed with TB that are not or inadequately treated for the disease
    • The child must remain in contact with persons that were infected with Mycobacterium tuberculosis that is resistant to the antibiotics isoniazid and rifampin

    Health Care Workers
    The consideration for this vaccine is only on an individual basis, in which the person:

    • Is in contact with a large population of TB patients infected with Mycobacterium tuberculosis that is resistant to isoniazid and rifampin
    • Drug-resistant TB is being transmitted between health care workers
    • Widespread preventative measures against the spread of TB have been implemented, but deemed unsuccessful

    Most patients vaccinated with the BCG vaccine will proved a positive TB skin test, due to their immunological memory and the exposure of Mycobacterium tuberculosis.
    In most cases the prevention of TB is related to how the disease is controlled. There are many different measures that need to be controlled when a TB prevention plan is put into effect. Hospitals and other health care centers that treat TB patients are required to have a protocol to prevent transmission of the disease. The CDC recommends the three goals and a three level hierarchy to effectively carry out infection control. Patients infected with the disease should be identified immediately and precautions should be taken if airborne particles spreading. Lastly, if it is assumed or confirmed the patient has TB disease effective treatment should be administered. With those three goals comes the hierarchy of administrative protocol, controlling the environment the patient is and has been in, and utilizing what protective respiratory equipment is available. The hierarchy and patient treatment procedures are put in place to prevent this disease from spreading to health care staff, as well as other patients [4].

    Host Immune Response

    Immune Response to TB[9]

    Tuberculosis acts in a two-step mechanism that begins with a primary infection and as the host deteriorates the secondary disease can occur. When infected with the Mycobacterium tuberculosis a healthy individual with a strong immune system presents asymptomatically or with mild flu like symptoms. Due to being of low to no risk, most patients are left with these bacteria growing and colonizing within their body [2]. Pulmonary tuberculosis infections begin with the Mycobacterium tuberculosis invading and reproducing within the macrophages residing in the infected alveoli. If the innate immune system is unable to control the bacteria and keep the infection latent, the constant reproduction will cause the macrophage to lyse. Now the bacteria are floating around the hosts’ tissues which causes the amount of oxygen in this area lungs begins to decrease. Due to the decrease in oxygen, the M. tuberculosis is unable to continue reproducing in the tubercle, but the tissue begins to kill itself in order to stop the bacterial reproduction in new tubercles. As the disease progresses T cells are able to recognize the M. tuberculosis antigens and activate the adaptive immune response. This adaptive immune response is unable to cope with the tuberculosis disease progression due to the infected tubercles liquefying. When the tubercles begin to produce a liquid environment a desirable environment is created, which causes rapid reproduction of the bacteria. At this point, the immune system is rarely able to rid the host of the disease. [7].


    References

    1 Conway, Tyrrell. “Genus conway”. “Microbe Wiki” 2013. Volume 1. p. 1-2.
    2 NHS General Information on Tuberculosis
    3 Ozimek, Maleana Mycobacterium tuberculosis
    4 CDC General Information on Tuberculosis
    5 PPD skin test Medline Plus
    6 Exposure to Tuberculosis Vanderbilt Occupational Health Clinic
    7 Davidson College Pathogen Life Cycle

    Created by Jennifer Gallup, student of Tyrrell Conway at the University of Oklahoma.

    University of Oklahoma Microbiology in Arezzo, Italy[10]