Bacterial endospores: Difference between revisions

From MicrobeWiki, the student-edited microbiology resource
Line 22: Line 22:
The exosporium is the outermost structure of the spore, comprised mainly of proteins, lipids and carbohydrates [[#References|[2]]]. This composition gives the exosporium its inherent hydrophobic characteristic that make it insoluble and contributes to the pathogenicity of spores [[#References|[2]]]. This structure is not present in all sporulating bacteria [[#References|[2]]]. The spore coat lies under the exosporium (if present) and is made of thin protein layers that are composed of coat proteins that are heavily cross linked via disulfide bonds [[#References|[2]]]. This structure serves as the initial permeability barrier, sieving out the larger molecules and allowing the permeation of smaller molecules such as germinants [[#References|[2]]]. The outer membrane resides under the spore coat and its function is not yet known [[#References|[2]]]. The cortex lies below the outer membrane and is a peptidoglycan structure which differs from vegetative peptidoglycan by its lack of teichoic acids and low levels of cross linking [[#References|[2]]]. The germ cell wall lies below the cortex and is also composed of peptidoglycan [[#References|[2]]]. Structural differences in the germ cell wall and the cortex permit the selective degradation of the cortex upon germination and facilitate the transformation of the germ cell wall into the bacterial cell wall of a vegetative cell [[#References|[2]]]. Below the germ cell wall is the inner membrane. This structure is similar in composition to the cytoplasmic membrane of a vegetative cell, but differs greatly in its fluidity and permeability. The decreased mobility of the membrane lipids renders the structure highly impermeable to all molecules including water, thus preventing the diffusion of most molecules into the core [[#References|[2]]]. The inner membrane contains surface germinant receptors which bind germinants and initiate germination and vegetative growth [[#References|[9]]]. The core contains the bacterial DNA, RNA, ribosomes, and most essential enzymes [[#References|[2]]]. Its dehydrated state contributes to the enzymatic dormancy and heat resistance of the spore [[#References|[10]]] [[#References|[11]]]. Inside the core the bacterial DNA is bound to small acid-soluble spore proteins (SASPs) that physically shield the DNA from harmful chemicals and enzymes [[#References|[10]]]. The conditions within the spore’s core contribute largely to its resistance to unfavorable environmental conditions, and are discussed in detail below.
The exosporium is the outermost structure of the spore, comprised mainly of proteins, lipids and carbohydrates [[#References|[2]]]. This composition gives the exosporium its inherent hydrophobic characteristic that make it insoluble and contributes to the pathogenicity of spores [[#References|[2]]]. This structure is not present in all sporulating bacteria [[#References|[2]]]. The spore coat lies under the exosporium (if present) and is made of thin protein layers that are composed of coat proteins that are heavily cross linked via disulfide bonds [[#References|[2]]]. This structure serves as the initial permeability barrier, sieving out the larger molecules and allowing the permeation of smaller molecules such as germinants [[#References|[2]]]. The outer membrane resides under the spore coat and its function is not yet known [[#References|[2]]]. The cortex lies below the outer membrane and is a peptidoglycan structure which differs from vegetative peptidoglycan by its lack of teichoic acids and low levels of cross linking [[#References|[2]]]. The germ cell wall lies below the cortex and is also composed of peptidoglycan [[#References|[2]]]. Structural differences in the germ cell wall and the cortex permit the selective degradation of the cortex upon germination and facilitate the transformation of the germ cell wall into the bacterial cell wall of a vegetative cell [[#References|[2]]]. Below the germ cell wall is the inner membrane. This structure is similar in composition to the cytoplasmic membrane of a vegetative cell, but differs greatly in its fluidity and permeability. The decreased mobility of the membrane lipids renders the structure highly impermeable to all molecules including water, thus preventing the diffusion of most molecules into the core [[#References|[2]]]. The inner membrane contains surface germinant receptors which bind germinants and initiate germination and vegetative growth [[#References|[9]]]. The core contains the bacterial DNA, RNA, ribosomes, and most essential enzymes [[#References|[2]]]. Its dehydrated state contributes to the enzymatic dormancy and heat resistance of the spore [[#References|[10]]] [[#References|[11]]]. Inside the core the bacterial DNA is bound to small acid-soluble spore proteins (SASPs) that physically shield the DNA from harmful chemicals and enzymes [[#References|[10]]]. The conditions within the spore’s core contribute largely to its resistance to unfavorable environmental conditions, and are discussed in detail below.


File:Figure 3 endospore structure.png
[[File:Figure 3 endospore structure.png|300px|thumb|right|]]


=Resistance of Endospores=
=Resistance of Endospores=

Revision as of 04:08, 16 December 2012

This student page has not been curated.

Introduction

Endospores are dormant, non-reproductive and enzymatically inert forms of bacterial vegetative cells [1]. Endospore-producing bacteria are more conventionally termed “sporulating bacteria”. Sporulating bacteria are derived from the [1] Firmicute phylum and mainly consist of [2] Gram positive bacteria [7]. These endospore-forming bacteria belong to the [3] Bacillus and Clostridium genus [2]. An endospore is a reduced form of a bacterium. It is comprised of a core containing only the bare essentials necessary for the initiation of bacterial growth. The core is surrounded by a tough and highly impermeable coating that is made up of several layers. Endospores serve to protect the bacterium from harmful environmental conditions by reducing it into a desiccated, cryptobiotic and highly defensive state which conveys resistance to many environmental conditions that would otherwise harm and kill the vegetative form of the bacterium. These environmental conditions include extreme temperatures, radiation, extreme pH levels, extreme pressures and harmful chemical agents [1]. The metabolic dormancy and protective capability of endospores were demonstrated by the successful isolation and revival of Bacillus sp. endospores from 25- to 40-million-year-old amber [1]. Thus, sporulation has proven itself to be a vital mechanism of bacterial survival.


The Life Cycle of Sporulating Bacteria

Sporulating bacteria can take on two distinct morphologies, one being an endospore and the other being a vegetative cell. The decision to conform to either morphology is determined by environmental stimuli which convey information to the inside of the cell through a process mediated by a [4] phosphorelay signal transduction system [3]. Bacterial cells will sporulate in response to debilitating growth conditions [6]. In contrast, a bacterium will vegetate in the presence of germinants, nutrients and other favorable environmental conditions [9]. When a bacterium senses an unfavorable change in environmental conditions such that growth is no longer attainable, it will transmit this information to the inside of the cell through the interaction of a sensor kinase and a regulatory protein and induce the up-regulation of sporulating gene products [3]. This cell, in turn, undergoes a transformation that will render it resistant to those environmental conditions and enables it to remain unaffected in a dormant state until favorable conditions are restored.

Figure 1.jpg.png

Mechanism of Sporulation

Initiation of sporulation is mediated by at least five sensor kinases that feed into the sporulation phosphorelay signal transduction cascade [3]. These sensor kinases are termed KinA, KinB, KinC, KinD and KinE, and are each specific to different environmental stimuli [3]. Having several sensor kinases allows for multiple environmental signals to influence the initiation of sporulation [4]. In response to the specific interaction with unfavorable environmental stimuli, the sensor kinases would [5] autophosphorylate a conserved histidine residue by an ATP-dependent reaction [3]. The different sensor kinases feed their respective signals into the phosphorelay pathway through a single protein called Spo0F [4]. From here, Spo0F~P transfers the phosphate group to Spo0B and finally, Spo0B~P phosphorylates Spo0A [8]. Spo0B acts as a mediator between Spo0F and Spo0A by delivering the signals from the point of entry into the cell to the point of regulation. Spo0A acts as a DNA-binding regulatory protein by positively regulating genes necessary for sporulation and negatively regulating genes involved in vegetative growth [7].

Figure 2.jpg.png

Endospore Structure

The exosporium is the outermost structure of the spore, comprised mainly of proteins, lipids and carbohydrates [2]. This composition gives the exosporium its inherent hydrophobic characteristic that make it insoluble and contributes to the pathogenicity of spores [2]. This structure is not present in all sporulating bacteria [2]. The spore coat lies under the exosporium (if present) and is made of thin protein layers that are composed of coat proteins that are heavily cross linked via disulfide bonds [2]. This structure serves as the initial permeability barrier, sieving out the larger molecules and allowing the permeation of smaller molecules such as germinants [2]. The outer membrane resides under the spore coat and its function is not yet known [2]. The cortex lies below the outer membrane and is a peptidoglycan structure which differs from vegetative peptidoglycan by its lack of teichoic acids and low levels of cross linking [2]. The germ cell wall lies below the cortex and is also composed of peptidoglycan [2]. Structural differences in the germ cell wall and the cortex permit the selective degradation of the cortex upon germination and facilitate the transformation of the germ cell wall into the bacterial cell wall of a vegetative cell [2]. Below the germ cell wall is the inner membrane. This structure is similar in composition to the cytoplasmic membrane of a vegetative cell, but differs greatly in its fluidity and permeability. The decreased mobility of the membrane lipids renders the structure highly impermeable to all molecules including water, thus preventing the diffusion of most molecules into the core [2]. The inner membrane contains surface germinant receptors which bind germinants and initiate germination and vegetative growth [9]. The core contains the bacterial DNA, RNA, ribosomes, and most essential enzymes [2]. Its dehydrated state contributes to the enzymatic dormancy and heat resistance of the spore [10] [11]. Inside the core the bacterial DNA is bound to small acid-soluble spore proteins (SASPs) that physically shield the DNA from harmful chemicals and enzymes [10]. The conditions within the spore’s core contribute largely to its resistance to unfavorable environmental conditions, and are discussed in detail below.

Figure 3 endospore structure.png

Resistance of Endospores

Heat Resistance

Wet heat resistance is a notable characteristic of spores when suspended in an aqueous medium. Generally, wet heat resistance allows spores to be resistant to temperatures 40 degrees celsius higher than their respective vegetative form [11]. The major determinant of wet heat resistance is the core water content [10]. Spores exhibit an inversely proportional relationship between water content and wet heat resistance and thus, spores with increased wet heat resistance have decreased core water content [10]. In addition, spores that form at higher temperatures will naturally have lower core water content, and thus, have greater wet heat resistance [11]. Dry heat causes significant DNA damage in a vegetative cell [11]. As a result, SASPs play a major role in the dry heat resistance of spores. By binding to and physically shielding the DNA, SASPs prevent its breakage at increased temperatures [10] [11].

Chemical Resistance

Many harmful chemicals kill bacteria via DNA-damaging mechanisms [10]. However, spores have evolved a number of mechanisms that confer chemical resistance. The spore coat is important in the resistance to many oxidizing chemicals such as chlorine dioxide, hypochlorite, ozone and peroxynitrite [2] [10] [11]. It functions by reacting with these chemical agents and detoxifying them before they pass through the spore coat [10]. In addition, the inner membrane’s extremely low permeability prevents both hydrophobic and hydrophilic molecules from entering into the core [11]. SASPs also protect the DNA by binding to it and shielding it from harmful chemical agents that enter the core [11].

UV Radiation Resistance

UV radiation damages the DNA of a cell and induces mutations. Saturation of an endospore’s DNA with SASPs protects the DNA from this harmful threat [10] [11].

References

(1) Cano, Raul J., and Monica K. Borucki. "Revival and Identification of Bacterial Spores in 25- to 40-Million-Year-Old Dominican Amber." Science 268.5213 (n.d.) (2012): 1060-064. Web.

(2) Leggett, M.J., G. McDonnell, S.P. Denyer, P. Setlow, and J.-Y. Maillard. "Bacterial Spore Structures and Their Protective Role in Biocide Resistance." Journal of Applied Microbiology 113 (2012): 485-98. Web.

(3) Stephenson, Keith, and James A. Hoch. "Evolution of Signalling in the Sporulation Phosphorelay." Molecular Microbiology 2 (2002): 2967-304. Web.

(4) Piggot, Patrick J., and David W. Hilbert. "Sporulation of Bacillus Subtilis." Current Opinion in Microbiolgy 7 (2004): 579-86. Web.

(5) http://www.eoearth.org/article/Bacteria?topic=49480#gen0

(6) Varghuese, Kottayil I., Haiyan Zhao, Vidya Harini Veldore, and James Zapf. "Sporulation Phosphorelay Proteins and Their Complexes: Crystallographic Characterization." Methods in Enzymology 422 (2007): 102-22. Web.

(7) Hilbert, David W., and Patrick J. Piggot. "Compartmentalization of Gene Expression during Bacillus Subtilis Spore Formation." Microbiology and Molecular Biology Reviews (2004): 234-62. Web.

(8) Stragier, Patrick, and Richard Losick. "Molecular Genetics of Sporulation in Bacillus Subtilis." Annual Reviews 30 (1996): 297-341. Web.

(9) Setlow, Peter. "Spore Germination." Current Opinion in Microbiolgy 6 (2003): 550-56. Web.


(10) Setlow, Peter. "Spores of Bacillus Subtilis: Their Resistance to and Killing by Radiation, Heat and Chemicals." Journal of Applied Microbiology 101 (2006): 514-25. Web.

(11) Nicholson, Wayne L., Nobuo Munakata, Gerda Horneck, Henry J. Melosh, and Peter Setlow. "Resistance of Bacillus Endospores to Extreme Terrestrial and Extraterrestrial Environments." Microbiology and Molecular Biology Reviews 64 (2000): 548-72. Web.